SEAT Ventilation
Index
Source: SEAT Ventilation
https://seat-ventilation.com/
https://seat-ventilation.com/
This article introduces the representative product lineup of corrosion-resistant industrial fans offered by SEAT Ventilation and the applications they are suited for. It also explains the features that make SEAT Ventilation’s fans a common choice in harsh environments such as chemical plants and laboratories.
Product Examples of Industrial Fans
Offered by SEAT Ventilation
This section introduces the main products, the “JET Series” and “SEAT Series,” which are commonly used for exhausting corrosive gases.
JET Series
Source: SEAT Ventilation
https://seat-ventilation.com/products/jet-20
https://seat-ventilation.com/products/jet-20
Situations Where the
JET Series Works Best
This series is suitable for sites that need to exhaust harmful corrosive gases high above the roof to help prevent them from re-entering the building. The weather-resistant body, designed specifically for vertical exhaust, performs especially well in harsh outdoor exhaust environments where long-term safety is required, such as chemical plants and research facilities.
*Specifications shown are for the JET 20.
| Fan type | Polypropylene centrifugal fan (inline type) |
|---|---|
| Airflow range | 235–942 CFM (400–1,600 m³/h) |
| Total pressure | 80–1,200 Pa |
| Inlet and outlet diameter | 6.30" diameter (160 mm) |
| Material | Polypropylene (UV-resistant and recyclable) |
| Drive method | Direct drive |
| Motor | Single-phase 115/230 V or three-phase 230/460 V |
| Frequency | 50 Hz or 60 Hz (when using a frequency converter) |
| Noise level (A) | 64 dB (1,150 RPM) / 75 dB (1,725 RPM) / 93 dB (3,450 RPM) |
| Explosion-proof rating | ATEX Zone 2 compliant (three-phase motors only) |
| Applicable standards | ISO 9001:2008 |
SEAT Series
Source: SEAT Ventilation
https://seat-ventilation.com/products/seat-20
https://seat-ventilation.com/products/seat-20
Situations Where the
SEAT Series Works Best
This series uses a scroll-type design that can provide high static pressure and is suitable for integration into draft chambers and scrubbers. It performs especially well in laboratories and plating factories that handle strongly acidic gases such as sulfur compounds and hydrochloric acid. The casing can rotate 360 degrees, which is a major advantage because it allows the discharge direction to be adjusted flexibly to match the site piping layout.
*Specifications shown are for the SEAT 20.
| Fan type | Corrosion-resistant polypropylene centrifugal fan |
|---|---|
| Airflow range | 118–1,059 CFM (200–1,800 m³/h) |
| Total pressure | 50–1,400 Pa |
| Inlet and outlet diameter | 6.30" diameter (160 mm) |
| Material | Polypropylene blended with HALS (hindered amine light stabilizer) for high UV resistance |
| Drive method | Direct drive |
| Motor power supply | Single-phase 220 V or three-phase 220/380 V (EC-compatible) |
| Frequency | 50 Hz or 60 Hz (when using a frequency converter) |
| Maximum allowable temperature | 140°F (60°C) |
| Options (sold separately) | Metal chair mount, high-protection option, roof kit |
| Explosion-proof rating | Models available for ATEX Zone 2 compliance |
Implementation Case Studies of
SEAT Ventilation’s Industrial Fans
No specific examples of industrial fan use were available on the official website.
What is SEAT Ventilation's Industrial Fan?
Corrosion-Resistant Ventilation for Chemical Plants and Laboratories
SEAT Ventilation provides highly durable, corrosion-resistant polypropylene fans engineered for harsh chemical and laboratory environments. Their specialized centrifugal fans offer a reliable and practical solution to safely exhaust harmful corrosive gases while ensuring long-term facility safety.
Our media independently researches and introduces recommended industrial fans based on specific needs like cooling, exhaust, and ventilation. Please check our 3 selected products below.
Company Information:
SEAT Ventilation
| Company Name | SEAT Ventilation |
|---|---|
| Headquarters Address | Parc Technologique Delta Sud, Verniolle, FR |
| Official Website | https://seat-ventilation.com/ |
Three Recommended
Industrial Fan Products Chosen
by Cooling, Exhaust, and Ventilation
Industrial Fan Products Chosen
by Cooling, Exhaust, and Ventilation
Cooling
For Heat Stress Prevention
For Heat Stress Prevention
Gojoh
COOL FAN MIST
Source: Gojoh Official Website
(https://smile-fans.jp/products/cool-fan-mist/)
(https://smile-fans.jp/products/cool-fan-mist/)
6°C cooler than the surroundings (*1) for 8 hours. Powerful 25m reach + auto-swing to optimize your entire workspace.
Durable, hygienic stainless steel at a portable 210 lbs. Chemical-resistant and built for frequent relocation and long-term use.
| Type | Evaporative cooler |
|---|---|
| Dimensions (in/mm) |
Approx. 59.1" × 25.6" × 70.9" (1500 × 650 × 1800 mm) |
| Coverage Area |
Approx. 2,150–3,230 sq ft |
| Weight | Approx. 210 lb |
Exhaust
For Dust and Smoke Control in Confined Spaces
For Dust and Smoke Control in Confined Spaces
Allegro
8" COM-PAX-IAL Blower
Source: Allegro Official Website
(https://www.allegrosafety.com/product/8-axial-ac-plastic-mini-pak-blower/)
(https://www.allegrosafety.com/product/8-axial-ac-plastic-mini-pak-blower/)
Rapidly exhausts dust/smoke replacing approx. 23.5m³ of air/min (*2). Lightweight polyethylene body is corrosion, UV, and chemical resistant for harsh environments.
Weighs under 19 lbs (lighter than steel) with integrated ducting. Easy to carry and set up, ensuring ventilation protocols are never skipped due to hassle.
| Type | Portable ventilation blower |
|---|---|
| Dimensions (in/mm) |
Approx. 17.5" × 11.3" × 13.5" (445 × 286 × 343 mm) |
| Coverage Area |
N/A |
| Weight | Approx. 19 lb |
Ventilation
For Stagnant Air and Moisture Control
For Stagnant Air and Moisture Control
DuctSox
ZOO FANS H series
Source: DuctSox Official Website
(https://www.zoofans.com/our-company)
(https://www.zoofans.com/our-company)
Designed by spatial volume, not floor area. Creates a column of air mixing ceiling to floor to inhibit condensation, mold, and rust.
Includes one-touch mounting hardware. Low-cost installation even in warehouses where large HVLS fans won't fit.
| Type | Destratification Fan |
|---|---|
| Size (mm) | 445×391×551 (*3) |
| Coverage | 25 ft (*3) |
| Weight | 20 lb (*3) |
*1 Cool air temperature may vary depending on conditions such as ambient temperature and the surrounding environment. Because it uses water, use caution in areas where moisture is a concern.
*2 Basis and Calculation Method: Calculated based on the maximum airflow (Straight) of “791 CFM” for the “8" (20.3 cm) AXIAL AC PLASTIC MINI-PAK BLOWER (9532-15)” as listed in the catalog.
[Formula] 791 CFM × 0.02832 ≈ 22.4 m³/min (Converted as 1 CFM ≈ 0.02832 m³/min) | Source: Allegro Official Website [PDF] (https://www.allegrosafety.com/wp-content/uploads/2023/01/9532-15-9532-25-9532-15E-9532-25E-AC-Plastic-Blower.pdf)
*3 All specifications are for the H25-EC model.
*2 Basis and Calculation Method: Calculated based on the maximum airflow (Straight) of “791 CFM” for the “8" (20.3 cm) AXIAL AC PLASTIC MINI-PAK BLOWER (9532-15)” as listed in the catalog.
[Formula] 791 CFM × 0.02832 ≈ 22.4 m³/min (Converted as 1 CFM ≈ 0.02832 m³/min) | Source: Allegro Official Website [PDF] (https://www.allegrosafety.com/wp-content/uploads/2023/01/9532-15-9532-25-9532-15E-9532-25E-AC-Plastic-Blower.pdf)
*3 All specifications are for the H25-EC model.